300ml Sublimation Coating/spray For Cotton fabric & Polyester/cotton

Description

Cotton Sublimation polymer coating.
Made in Italy
. Very high quality and easy to use.
3 - A Brand
.
Polymer concentrate for sublimation liquid coating.
Sublimation to Fabric ( 100% cotton, blended cotton, linen, polyester, etc.) .
The concentrate is paste form, shelf life 1 year ( 10 months after your ordering), stored in place away from sunlight, in temperature 5-40 grade celsius.
The product is not considered dangerous according to EC Regulation 1272/2008 (CLP).
Hazard pictograms:
None
Hazard statements:
None
Precautionary Tips:
None
Special provisions:
Special provisions based on Annex XVII of REACH and subsequent amendments:
None
2.3. Other dangers
VPvB Substances: None - PBT Substances: None
Note: We offer concentrate to make coating liquid for cotton.
The packaging contains
60gr polymer concentrate 3-A brand.
With 60gr
3-A brand polymer concentrate
you can make 300ml liquid coating
( 60gr concentrate + 240gr natural water =
300ml liquid coating
)
Video Tutorial:
1. How to make Liquid coating 3-A brand:
https://www.youtube.com/watch?v=FBbMLSvD6rE
2. How to make sublimation to 100% cotton with 3-A polymer coating :
https://www.youtube.com/watch?v=397PZVfBrUQ
TRANSFER CONDITIONS
MATERIAL
TEMPERATURE
TIME
Cotton
180°C (or higher)
50-60 sec
The paper may be printed with every kind of sublimation ink.
Such paper has to be transferred at a minimum temperature of 180°C or higher (depending of the ink), for a time of 50/60 seconds, quality of the fabric permitting.
It is essential that the peeling of the paper takes place immediately after hot transferring (hot split), in order to avoid that the paper peels off not perfectly
Instructions
1.
Make the liquid coating
(mix polymer concentrate with water at
Rate 1:4
,
1
concentrate  :   4   natural  water
)
2.
Spray well the fabric with polymer  liquid coating.
3.
Cure well the fabric before to press in heat press.
4.
Press for sublimation with medium pressure for 50-60 seconds at 180
0
C
or higher ( depending of the ink)
Heat cures
: heat gun ( hair dryer ) , tunnel dryer etc.
Note:
Mix well the concentrate with water for more than 3 minutes, for good homogenization (you can mix with kitchenware mixer, electric hand-mixer).
For wood sublimation  you can spray coating liquid or you can use paint brush or paint roller for the application of concentrate in paste form.
SPECIAL INSTRUCTIONS
·
Always test the application characteristics, before starting production.
·
It is recommended to do preliminary tests, in order to determine the right transfer time and   temperature
.
GENERAL FEATURES
·
Good color performance after sublimation
·
Soft touch
·
Good washing resistance (40°C)
·
Free from risk labelling
Always test samples prior to production runs.
NON – FLAMABLE., IRRITATING TO EYES & RESPIRATORY SYSTEM, DO NOT SWALLOW.