New Animals Pedal Firewood Acoustic DI MKII Guitar Effects Pedal

Description

New Animals Pedal Firewood Acoustic DI MKII Guitar Effects Pedal
This item is new, in box!
With your purchase you will receive two Hosa metal patch cables (IRG-100.5) and a Hosa 10 foot Pro guitar cable!
Orders placed before 12:00 PM Eastern Standard Time will ship same day! Orders placed after 12:00 will often ship same day as well, if not, they will ship next day.
International orders: Please note that you will be responsible for any applicable customs fees or import taxes!
I am an Authorized Dealer, a store receipt will be included with your purchase.
Check my feedback and bid with confidence!
From Animals:
The appeal of "unplugged" has made world-famous guitarists leap forward, and the roaring grunge rock band has created a further legend with "unplugged". Classical, folk, and even rock guitarists cannot separate the acoustic guitar.
The Animals Pedal Firewood Acoustic DI MKII is an active DI pedal for electric-acoustic guitars that demonstrates its power on live stages and recordings. Manufactured with analog and discrete circuits, it outputs to mixers and amplifiers without missing out on delicate expressions.
Although it is a simple and compact pedal, it is equipped with various functions.
The powerful 3-band active equalizer, which allows you to adjust the tone to suit the song, the venue, the characteristics of the guitar or power amp, offers a warm and balanced tone like classic nylon strings, or a crisp tone that complements vocals in an ensemble. Creates a wide variety of acoustic sounds, including bright and sparkling tones.
Three equalizers, HIGH, MID, and LOW, powerfully adjust the tone over a range of ±15dB, centered at 3.5kHz, 800Hz, and 180Hz, respectively. It is effective not only for sound creation, but also as a control that cuts unnecessary frequencies and suppresses feedback.
Add crisp power and presence to your sound with the GAIN control for adding a touch of saturation.
The MUTE footswitch mutes the output at any time. In addition to emergency response to feedback that is unavoidable with acoustic guitars, the acoustic guitar system itself can be muted when switching guitars or while playing an electric guitar.
It can also be used in tricky ways, such as chopping up the sound as an effect.
Furthermore, the volume can be changed with the BOOST switch. You can switch the volume of the lead part and the backing part, and switch the volume with your feet as the song develops.
Equipped with an effect loop, it is possible to apply effects such as chorus and delay at the same time when using an acoustic guitar or using it as a boost pedal.
In addition, it is equipped with a balanced output of XLR terminal that can output the guitar directly to the mixer. It can also be driven with phantom power. Power can be supplied from a mixer, etc. even in venues where outlets are insufficient, such as outdoor stages.
The Firewood Acoustic DI MKII is more than just a functionally great pedal. The high headroom and sound of the discerning circuit clearly output the tone of the guitar itself.
Although you can dare to create a crisp and hard "electric acoustic sound", you can clearly output a warmer and deeper tone unique to an acoustic guitar, down to the details. Even on a live stage, it creates a tone that is close to recording with a microphone in the studio.
● Control
LEVEL: Adjusts the overall volume.
LOW: Adjusts the low range within a range of ±15dB centered at 180Hz.
MID: Adjusts the midrange within a range of ±15dB, centered at 800Hz.
HIGH: Adjusts the high range within a range of ±15dB centered on 3.5kHz.
GAIN: Adjusts the output level and controls the overall saturation of the tone. It can also be slightly distorted.
INVERT: Inverts the phase.
MUTE Footswitch: Mutes the output.
BOOST footswitch: Increase volume. Boost level is constant.
● Input/output terminal
DC9VIN: Connect a standard center minus DC9V adapter.
IN: Input. Connect the cable on the instrument side.
SEND/RETURN: Effect loop. Connect a cable from the SEND to the input of the effect in the loop and RETURN from the output of the effect in the loop. The effects loop is always active.
OUT: Unbalanced out. Connect a cable to a guitar amplifier, etc.
BAL/48V: Balanced out of XLR connector. Used when connecting to a mixer, etc. Also, when using phantom power, it is supplied from here.
Specifications
Current Consumption: 18mA
Input Impedance: 470K
Maximum Output Level: 4V pp
Output Impedance (Unbalanced): 2.2K
Output Impedance (Balanced): 470 ohm
Effects Loop Impedance (SEND): 1K
Effect Loop Impedance (RETURN):
200K S/N Ratio: 68db (input 0.2V pp, output 4V pp, at 1kHz)
Size: 125 x 95 x 57mm
Weight: 360g